Special design diamond segments for concrete drilling arix

                            Product Description  

Product Name	Arix diamond core bit segment for reinforced concrete
Size	24*4*10mm  ( Specialized in making any sizes of diamond segment, we can make many different kinds of quality and sizes to fit your market and your stone. )
Diameter	102mm core drill bit ( 25-350mm Diamond Core Drill Bit segment can make )
Application	Diamond core drill bit segment Used for drilling reinforced concrete, granite etc.
Cutting Feedback	The ARIX Segments have a duration of 80 holes with 114*150mm deep.
Package	Color box,double blister card,skin packing,white box etc
Supply ability	50,000 pcs/month(We accept mixed order)
Quality	ISO9001&Gold Supplier Factory=Quality Control=Competitive Price=Owntechnology=OEM

  ARIX Segment designed to be used Wet or Dry on hand-held drills and big drills. ARIX technology provides faster cutting and longer life. For use on concrete with light to medium rebar. Aggressive segment design grips surface to prevent slippage for faster hole starting. Diagonal cut-out openings allow air flow for ample cooling without compromising bit strength. The barrel design for smoother drilling. ARIX technology gives you maximum productivity with the lowest possible cost per inch /foot cut. Diamonds are individually placed in strategic positions to maximize cutting performance.  

Core bit Diameter(mm)	Seg. Length(mm)	Seg. Thickness(mm)	Seg. Height(mm)
25/28/32/36/38/ 40/45/51/56	16	3.5	10
83/89/96/102/108/116/120/ 127/132/142/152/ 159/162/180/200	24	4.0	10
230/250/300/350	24	4.5	10
500/600	24	5.0	10

Other specifications of diamond core bit segment are available upon request.

This is what our ARIX Segment can drill and cut as below: HUAZUAN Advantage   Packaging & Shipping About US - HUAZUAN   FAQ Problems & solutions for drilling with diamond core bits 1.The core will not drill
• The material is too hard for the core bit application range: use a specification suitable for the material in question
• The diamond impregnation is blunt: sharpen the tool with a grinding stone or abrasive material
• Speed too high: reduce speed
• Water flow too high: reduce water flow
• Excessive play of the drilling stand guides: set up the drilling stand
correctly, or have it repaired
• Drilling stand not properly anchored: improve anchoring, use suitable dowels
and a thread rod
• Insufficient machine power: check the motor speed and slip-clutch. Use a more
powerful drill
• Drill motor running, but core bit not rotating: low contact pressure so that the slip clutch is not engaging. If the problem reoccurs, have the drill repaired   2.Excessive wear of the diamond segments
• Insufficient flow of water. Drilling sludge sharpens the diamonds and also wears them down: increase the water flow
• Feed / contact pressure too high: reduce feed
• Drilling material is very abrasive: use a harder core bit segment specification
• Excessive motor power: adjust the motor speed to reflect the core bit diameter
• Core drilling system has too much play, causes excessive vibrations: check and correct the settings. Tighten screws, effect repairs as needed
• The drill stand is not properly anchored: improve anchoring, use adjusting screws (make sure they are adjustable). Use the right dowels and threaded rods or the material that you are drilling   Contact Us  

Contact us if you need more details on Diamond Segments For Concrete. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Concrete Diamond Segments、Arix Diamond Segments. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Diamond Segment > Diamond segment for core drill